3、 FR -FR-A760-NA (North American version applied 手冊)
• While power is on or when the inverter is running, do not open the front cover.
Otherwise you may get an electric shock.
• Do not run the inverter with the front cover or wiring
5、 FR -FR-A701 (Japanese domestic version applied 手冊)
Abbreviations>
DU ..........................................Operation panel (FR-DU07)
PU................................................Operation panel (FR-DU07) and parameter unit (FR-PU04/
6、 FR -FR-A700-NA (North American version applied 手冊)
stopping of the inverter.
Use a noise filter to reduce the effect of electromagnetic interference. Otherwise
nearby electronic equipment may be affected.
Take measures to suppress harmonics. O
7、 FR-A700 -FR-A700-EC (European version applied 手冊)
1 Selections for use of the Mitsubishi 4-pole standard motor with power supply voltage of 400VAC 50Hz.
*2 Select the MCCB according to the inverter power supply capacity.
Install one MCCB per
8、 FR-A700 -FR-A700-EC (European version applied 手冊)
1 Selections for use of the Mitsubishi 4-pole standard motor with power supply voltage of 400VAC 50Hz.
*2 Select the MCCB according to the inverter power supply capacity.
Install one MCCB per
9、 FR-A700 -FR-A700-EC (European version applied 手冊)
1 Selections for use of the Mitsubishi 4-pole standard motor with power supply voltage of 400VAC 50Hz.
*2 Select the MCCB according to the inverter power supply capacity.
Install one MCCB per
10、 FR-A700 -FR-A700 PLC function programming 手冊
1.1 Block Diagram
How I/O data are transferred to/from the inverter by the built-in PLC function is
explained using function blocks.
(1) I/O data read, write, etc. can be performed by accessin
11、 FR-A700 -FR-A700 (Japanese domestic version basic 手冊)
DU: Operation panel (FR-DU07)
PU: Operation panel(FR-DU07) and parameter unit (FR-PU04, FR-PU07)
Inverter: Mitsubishi inverter FR-A700 series
FR-A700: Mitsubishi inverter FR-A7
12、 FR-A700 -FR-A700 (Japanese domestic version applied 手冊)
1 OUTLINE 1
1.1 Product checking and parts identification ........................................................ 2
1.2 Inverter and peripheral devices..........................................