資料介紹:
[DESIGN PRECAUTIONS]
DANGER
z Depending on the GOT main unit, communication board, communication
module or cable fault, the output from the GOT interface module may
remain ON or may remain OFF.
An external monitoring circuit should be provided to check for output
signals which may lead to a serious accident.
Not doing so can cause an accident due to false output or malfunction.
z If a communication fault (including cable disconnection) occurs during
monitoring on the GOT, communication between the GOT and PLC CPU is
suspended and the GOT becomes inoperative.
For bus connection: The CPU becomes faulty and the GOT inoperative.
For other than bus connection: The GOT becomes inoperative.
A system where the GOT is used should be configured to perform any
significant operation to the system by using the switches of a device other
than the GOT on the assumption that a GOT communication fault will
occur.
Not doing so can cause an accident due to false output or malfunction.