資料介紹:
This manual confers no industrial property rights or any rights of any other kind,
nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
held responsible for any problems involving industrial property rights which may
occur as a result of using the contents noted in this manual.
Warranty
Mitsubishi will not be held liable for damage caused by factors found not to be
the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the
Mitsubishi products; damage, secondary damage, accident compensation
caused by special factors unpredictable by Mitsubishi; damages to products
other than Mitsubishi products; and to other duties.
For safe use
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in
a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric
power, aerospace, medicine or passenger movement vehicles, consult with
Mitsubishi Electric.
This product has been manufactured under strict quality control. However
when installing the product where major accidents or losses could occur if the
product fails, install appropriate backup or failsafe functions in the system.
•
•
•
HEAD OFFICE
HIMEJI WORKS
: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310,
JAPAN
: 840, CHIYODA CHO, HIMEJI, JAPAN
Power Supply Specifications
Performance Specifications
between communication
connector frame and ground
terminal of PLC main unit
ulation
stance
5 MΩ or more by 500V DC
Insulation tester
Item Description
rnal Power
pply
145 mA at 24V DC is supplied from the internal service power
in the main unit via extension cable
Item Specifications
nsmission Type Bus network
t Type PROFIBUS-DP Slave
nsmission Data (Maximum
hanged Data Length)
• Cyclic Data : 144 Byte
• Acyclic Data : 140 Byte
ximum Number of
U-32DP at one PLC 8 units
ported
nsmission
ed (bps)
Bus
gth
9.6k, 19.2k, 45.45k,
93.75k
1,200 m (3,937') / segment
See Section 4.5
187.5k 1,000 m (3,281') / segment
500k 400 m (1,312') / segment
1.5 M 200 m (656') / segment
3M, 6M, 12M 100 m (328') / segment
OFIBUS Module ID “F332” hex
nnector
PROFIBUS-DP
Network
PROFIBUS-DP network (9 pin D-SUB)
bal Control
Supports SYNC, UNSYNC, FREEZE, and
UNFREEZE modes
minal Resistor Not built in.