資料介紹:
!
DANGER
• Do not write data into the "read-only area" in the buffer memory of the intelligent function
module. In addition, do not turn on/off the "reserved" signals among the I/O signals transferred
to/from the programmable controller CPU.
Doing so can malfunction the programmable controller system.
• Depending on the output element or the malfunction of the internal circuit, abnormal output may
occur. Install external monitoring circuitry for output signals that may lead to major accidents.
!
CAUTION
• Do not bunch the control wires or communication cables with the main circuit or power wires, or
install them close to each other.
They should be installed 100mm (3.94inch) or more from each other.
Not doing so could result in noise that may cause malfunction.
• During the power supply ON/OFF, current may run instantaneously from the output terminal.
Wait and see whether the analog output is constant, then start the control.