資料介紹:
WARNING
Before wiring or inspection, switch power off and wait for more than 15 minutes. Then, confirm th
is safe with voltage tester. Otherwise, you may get an electric shock.
Connect the servo amplifier and servo motor to ground.
Any person who is involved in wiring and inspection should be fully competent to do the work.
Do not attempt to wire the servo amplifier and servo motor until they have been installed. Otherw
may get an electric shock.
Operate the switches with dry hand to prevent an electric shock.
The cables should not be damaged, stressed, loaded, or pinched. Otherwise, you may get an elec
2. To prevent fire, note the following:
CAUTION
Do not install the servo amplifier, servo motor and regenerative brake resistor on or near combus
Otherwise a fire may cause.
When the servo amplifier has become faulty, switch off the main servo amplifier power side. Con
flow of a large current may cause a fire.
3. To prevent injury, note the follow
CAUTION