国产免费啪视频观看网站-国产免费区-国产免费全部免费观看-国产免费人成在线视频视频-国产免费爽爽视频免费可以看

Warranty
Mitsubishi will not be held liable for damage caused by facto
cause of Mitsubishi; machine damage or lost profits caused by
products; damage, secondary damage, accident compensati
factors unpredictable by Mitsubishi; damages to products o
products; and to other duties.
For safe use
• This product has been manufactured as a general-purpose pa
industries, and has not been designed or manufactured to be
device or system used in purposes related to human life.
• Before using the product for special purposes such as nuclear
aerospace, medicine or passenger movement vehicles, consu
• This product has been manufactured under strict quality contr
installing the product where major accidents or losses could o
fails, install appropriate backup or failsafe functions in the sys
This manual confers no industrial property rights or any rights
does it confer any patent licenses. Mitsubishi Electric Corpor
responsible for any problems involving industrial property right
a result of using the contents noted in this manual.
Hong Kong
China
Taiwan
Korea
Country/Region Sales offi Country/Region Sales office/Tel
Mitsubishi Electric Automation, Inc.
500 Corporate Woods Parkway, Vernon
Hills, IL 60061 U.S.A.
Tel : +1-847-478-2100
MELCO-TEC
Av. Paulista 1439, conj.74, Bela Vista CEP:
01311-200 Sao Paulo-SP-Brazil
Tel : +55-11-3285-1840
Mitsubishi Electric Europe B.V. German
Branch
Gothaer Strasse 8, D-40880 Ratingen,
Germany
Tel : +49-2102-486-0
Mitsubishi Electric Europe B.V. UK
Branch
Travellers Lane, Hatfield, Hertfordshire.,
AL10 8XB, U.K.
Tel : +44-1707-276100
Mitsubishi Electric Europe B.V. Italian
U.S.A.
Brazil
Germany
U.K.
Italy
Mitsubishi
(Hong Kon
10th Floor.
Road, Nort
Tel : +852-
Mitsubishi
(Shanghai)
17F, Chuan
No. 288 W
China 2000
Tel : +86-2
Setsuyo En
6F No.105
Hsiang, Ta
Tel : +886-
Mitsubishi
Ltd.
3F, 1480-6
Seoul, 157
Tel : +82-2
tatus in which no force is applied on the cable.
w
3 screws) on the terminal block with a tightening
s
-3
manufactured by JST Mfg. Co., Ltd.)
nd TG1.25-3
tured by NICHIFU Co., Ltd.)
mm2
6.2 mm (0.24" )
or less
style
al
Terminal screw
Crimp-style
terminal
minal When wiring two cables to one terminal
Terminal
0.13") φ 3.2 (0.13")
Specification
2 to 131°F)
-13 to 167°F)
Dew condensation shall not be considered.
Dew condensation shall not be considered.
ittent vibration is present
Number of times of
sweep
Acceleration Half amplitude
10 times in each of
X, Y and Z directions
(for 80 min)
− 0.075mm
9.8m/s2 −
uous vibration is present
Acceleration Half amplitude
− 0.035mm
4.9m/s2 −
imes in each of X, Y and Z directions
s shall not be present.
1'8") or less (*1)
l panel (*2)
indicates that contamination is caused by generation of only non-conductive
substances.
In this degree, however, temporary conduction may be caused by accidental
condensation.
5.2 Input specifications
5.3 Output specifications
5.4 Performance specifications
Item Specification
Input method DC input (external I/O power supply)
Number of inputs 2 points
Isolation method Isolation with photocoupler
Rated input voltage 24V DC
Rated input current Approx. 4 mA
Operating voltage range
20.4 to 28.8V DC (24V DC -15% to +20%)
Ripple ratio: Within 5%
Max. simultaneous ON
input points
100% (at 24V DC)
ON voltage/ON current 19 V or more/3 mA or more
OFF voltage/OFF current 11 V or less/1.7 mA or less
Input resistance 5.6 kΩ
Response
time
OFF→ON 1.5 ms or less (at 24V DC)
ON→OFF 1.5 ms or less (at 24V DC)
Common wiring method
2 points/1 common (2 points)
(terminal block two-wire type)
Item Specification
Output method Transistor output (external I/O power supply) (sink)
Number of outputs 2 points
Isolation method Isolation with photocoupler
Rated load voltage 12/24V DC
Operating load voltage
range
10.2 to 28.8V DC (Ripple ratio: Within 5%)
Max. load current 0.1A/point, 0.4A/1common
Max. inrush current 0.4A/10 ms
Leakage current at OFF 0.1mA or less/30V DC
Max. voltage drop at ON 0.3V or less (typical)/0.1A
0.6V or less (max.)/0.1A
Response
time
OFF→ON 1.0ms or less
ON→OFF 1.0ms or less
Surge suppression Zener diode
Common wiring method
2 points/1 common (2 points)
(terminal block two-wire type)
Internal protection for
outputs
Internal protection circuit none
Please connect the fuse in the connected load
outside.
Item Specification
Module
power
supply
Vol tage
20.4 to 28.8V DC (24V DC -15% to +20%)
Ripple ratio: Within 5%
Current consumption 55mA (when all points are ON)
Initial current 70mA
Max. allowable
momentary power
failure period
PS1:1ms
2 - φ4.5(0
hole (M4
C
49(1.93") 4.5
(0.18")
40(1.58")
80(3.15")
71.5(2.82") ± 0.6(0.03")
41(1.62") ± 0.4(0.02")
4 T